Inserting Batteries Into The Remote Control; The Two «Levels» Of The Remote Control - Grundig GV 470 S VPT User Manual

2. Connecting and Setting Up

Inserting Batteries into the Remote Control

The Two «Levels» of the Remote Control
Press the catch and remove the cover from the battery com-
partment.
Insert the batteries (2 x 1.5 V, mignon batteries) observing
correct polarity (marked on the bottom of the compartment).
If your recorder no longer responds correctly to the re-
mote control commands, the batteries may be exhausted.
Exhausted batteries must be removed.
We cannot be held responsible for damages resulting
from battery leakage.
Exhausted batteries must be handed over to a special
waste collecting point (environmental protection).
The buttons on the remote control are located on two sep-
arate "levels".
The buttons that are required for the essential functions of
the recorder are located on the upper level.
The buttons that are required for convenience functions are
located on the lower level.
Pull the lower level toward you as shown in the illustration.
9