Remote Control Of Other Grundig Video Recorders - Grundig GV 470 S VPT User Manual

4. Special Functions
Remote Control of other GRUNDIG Video
Recorders
With this remote control you can control different
GRUNDIG video recorders independently of each other.
You can use it with your GV 470 and a second recorder of the
series VS 600 to VS 900 and the GV 200 and later models.
In order to do so, the recorder must be adapted.
1 2 3
4 5 6
7 8 9
0
SAT
SET EW/ED OK AV/CV
RECORD
CHECK CL
TIMER PROGRAM
ON/OFF S-VHS AUTO
TRACKING
V HIFI
LP COUNT 0000
TV
+
–
AV
PROGRAM
RP 35
OK
TIP VPT INFO
VIDEO 1
STOP PICTURE
t
ATS CODE
PAL/SEC
VIDEO 2
Selecting the video level
When the switch is in the VIDEO 1 position, you can control
your GV 470;
When the switch is in the VIDEO 2 position, you can control
the second recorder.
If the switch 1 VIDEO 2 is not set to the selected video level
when controlling your GV 470, » VI DEO I « or » VI DEO 2 « in
the recorder´s display advises you that you must switch
the remote control to the other video level.
VIDEO 1
RE
DE
VIDEO 2
VIDEO 1
RE
DE
VIDEO 2
75
Adapting the second recorder for use with the
remote control
In order to control your GV 470, set the switch to the VIDEO 1
position. An adaption is not necessary in this case.
In order to control the second recorder, it is necessary to
change the command structure.
Set the switch to the VIDEO 1 position.
Disconnect your GV 470 from the mains.
Point the remote control at the second recorder, press the
Z
button, the numeric buttons
O
press the button.
The second recorder will only respnd if you set the switch to
the VIDEO 2 position.
Reconnect your GV 470 to the mains.
If you wish to undo the adaption, set the switch to the VIDEO 2
and press the Z button, the numeric buttons
and the O button consecutively.
8 5 1 7
, and then
8 5 1 6 ,