Operation With A Grundig Satellite Receiver - Grundig GV 470 S VPT User Manual

4. Special Functions
Operation with a GRUNDIG
Satellite Receiver
EURO-AV
EURO-AV EURO-AV
Preparation
Switch the TV set and the satellite receiver off.
Disconnect the video recorder from the mains.
Connecting
Connect the EURO-AV socket (to the recorder) of the satellite
receiver and the EURO-AV A2 socket of the video recorder
with a EURO-AV cable.
Connect the VCR socket of the satellite receiver and the
socket of the video recorder with a commercially available
cinch cable.
Insert the aerial plug of the house aerial into the –
the video recorder.
Connect the socket of the video recorder and the
of the TV set with a commercially available aerial cable.
Connect the EURO-AV socket of the TV set and the EURO-AV
A1 socket of the video recorder with a EURO-AV cable.
If your satellite receiver is provided with a decoder socket,
you can connect to this socket an existing PAY-TV decoder.
Operation
Switch on the TV set and the satellite receiver.
Reconnect the video recorder to the mains.
Recording satellite transmissions is described in the section
"Immediate Recording".
Record programming for satellite transmissions is described
in the programming examples.
– socket of
II
É
socket
71
OUT
EURO-AV A1 DECODER A2
L L
AUDIO
R R
H H
L L