Remote Control Of A Tv Set; Activating Info Messages For Pay Tv Stations - Grundig GV 470 S VPT User Manual

4. Special Functions

Remote Control of a TV Set

With this remote control RP 35 you can also control
GRUNDIG colour TV sets that use the remote control TP 590
and up.
The functions that can actually be carried out via remote
control depend, of course, on the technical features of
your GRUNDIG TV set.
Preparation
Press the mains button on the TV set to switch it on.
Point the the remote control at the TV set.
Programme selection
¢
You can use the
PROGRAM
gramme postions step by step, from 1 to 99.
Repeatedly press the button to select the programme
n
positions A1, A2 etc.
Adjusting the volume
z button, the volume decreases.
When you press the ¢
–
When you press the z
¢
+
Stand-By
During television pauses, you can switch your TV set to
stand-by by pressing the
b
Press the button to switch the TV set back on.
n
¢
buttons to select the pro-
button, the volume increases.
button.

Activating Info Messages for Pay TV Stations

Pay TV stations provide Info messages with certain broad-
casts.
To receive these messages, you must adapt your recorder
accordingly.
Selecting the function
Z
Press the , button, the numeric buttons
and the O button.
The Info messages appears on the TV screen.
This function can impair the picture quality of Teletext
pages of "norma" TV programmes. For this reason, deac-
tivate this function as soon as you have read the messa-
ges.
Deactivating the function
Press the Z , button, the numeric buttons
and the O button.
Recording broadcasts from a Pay-TV station
... with simultaneous viewing on the tele-
vision set
(for example, programme position 4 or AV).
For this purpose, you must be able to select » AV « at any pro-
gramme position on the television set (for example GRUNDIG
television sets).
Select » AV « at programme position 4 or programme positi-
on AV on your television set.
... while another, "normal" broadcast is being
viewed on the television set.
If your television set cannot be switched to the "normal" tele-
vision programme, please proceed as follows:
Press the following buttons in sequence on the remote con-
Z
trol: the button, the numeric buttons
the button.
‚
If you wish to undo this function, press the following buttons
in sequence on the remote control: the
8 5 1 3
numeric buttons
76
8 5 4 3
8 5 4 2
8 5 1 4
and
Z button, the
and the button.
‚