Grundig GV 470 S VPT User Manual page 42

7. Record Programming
Press these buttons on the
remote control
10. Programming the next
broadcast
or
a) with VPT b) manually
Repeat the ope- The steps for manual program-
rating steps, ming are described in the second
starting at step part of the operating instruc-
1, page 36. tions, pages 15 through 23.
Modifications and completions of the recording
data
(necessary for point 9 of the programming example)
Correcting TIMER data
Select the desired timer with the
Press the or button until the cursor
at the data to be corrected.
Use the numeric buttons
and confirm the remaining Timer data with the
Now you can programme the next broadcast.
Recording without VPS/PDC
Select the desired timer with the
Press the button once; the cursor
the stop time.
Erase the VPS/PDC with the
The cursor jumps to the first digit of the start time.
If the start time and the VPS/PDC time differ, enter the new
start time with the numeric buttons
remaining data with the
Now you can programme the next broadcast.
You will see this on your TV screen
or button.
is positioned
... to » overwrite « this data
button.
or button.
is positioned after
(blue) button.
... and confirm the
button.
Variant 1
Doubling the cassette recording time
Select the desired timer with the
Press the button once; the cursor
the stop time.
Select the long-playing mode by pressing the
(additional indication: » L «), then press the
41
Explanations
or button.
is positioned after
button.
button