Grundig GV 470 S VPT User Manual page 118

4. Special Functions
Preparation
Switch on the TV set (serves as a control monitor) and select
the programme positon for the video recorder (AV programme
positon).
Open the front cover of the recorder.
Insert the cassette you want to copy in the camcorder, and
insert a cassette with sufficient playing time in the recorder
which is to record.
Re-recording
with synchronous control via the camcorder´s
5-pin socket or 2.5 mm ∅ ∅ socket
The Master Slave Edit function described in this section only
works for camcorders with the so-called "bus control".
Master Slave Edit function means that the playback functions
of the camcorder can be operated with the control elements
of the video recorder.
Preparing re-recording
In the video recorder (GV 470) playback mode, locate the end
of the scene onto which the new recording is to be joined by
pressing the K button (playback pause).
Display on recorder: » II «.
Switch the recorder (GV 470) to recording pause by pressing
both M ; buttons.
Display on recorder: » l II «.
button until » C V « (for VIDEO IN/
Continue to press the a
L-AUDIO-R IN sockets) or » S I « (for S-VHS IN/
L-AUDIO-R IN sockets) appears in the recorder´s display.
Master Slave Edit function
Press the MASTER SLAVE EDIT button to switch the con-
¢
trol elements of the recorder to camera operation.
Display on recorder: » C A M E R A «.
The recorder cannot be operated when its control ele-
ments are switched to the camcorder.
You can operate the following camcorder functions using the
control elements of the recorder:
Playback, Stop, Pause (with the
Single Frame Advance, Forward/Reverse with the jog knob,
Picture search, and Fast Forward/Reverse with the shuttle
ring.
Synchronous Re-recording
J , ` , K buttons),
Searching for a scene and starting re-recording
In camcorder playback mode, search for the beginning of the
desired scene.
Switch to playback pause at the required point in the desired
scene.
Switch the recorder´s control elements back to recorder ope-
ration by pressing the
¢
The display » C A M E R A « on the recorder goes out.
Start record/playback on the recorder (GV 470) with the
M ;
buttons.
After a brief exchange of data between the recorder (GV 470)
and the camcorder, the camcorder begins playback and your
recorder (GV 470) simultaneously begins recording »
and » E D I T « appear in the recorder´s display.
Concluding a recording
Press the K button.
Concluding copying function
`
Press the button.
Changing the re-recording preroll time
You use this function to match the preroll times of the video
recorder and camcorder.
If the beginning of the scene is missing, or if the recording
begins too soon, you can adjust the times as follows:
Press the MASTER SLAVE EDIT button.
¢
Display on the recorder: » CAMERA «.
Press the button.
DUBBING
The preroll time appears in the recorder´s display, for
example, » I :4 3 «.
Change the preroll time with the
If the beginning of the desired scene comes too soon, press
the button; if it comes too late, press the
Store the setting by pressing the
Conclude by pressing the
64
MASTER SLAVE EDIT button.
or button.
button.
button.
DUBBING
MASTER SLAVE EDIT button.
¢
l «