Setup And Use Of Job Flow Sheets With Mailboxes; Overview; Features Supported For Job Flow - Xerox WorkCentre 7300 Series Administrator's Manual

Setup and Use of Job Flow Sheets with Mailboxes

Overview

Job flow is a feature for executing a series of registered actions.
The target of a job flow is documents stored in a Mailbox.
Two methods are available: 1) automatically start a job flow when a document is stored in a Mailbox, or 2)
select a job flow to manually act on documents stored in a Mailbox.
To start a job flow, you must link the job flow sheet to a Mailbox, or to documents within a Mailbox.
Documents are then processed as specified on the job flow sheet.
To automatically link document processing in a Mailbox with a job flow sheet, see Creating a Mailbox and
linking to a Job Flow Sheet (for automatic processing) in this section of this guide.
To manually link document processing in a Mailbox with a job flow sheet, see Manually linking a Job
Flow Sheet to documents in a Mailbox in this section of this guide.

Features supported for Job Flow

Incoming Mailbox Documents
Faxes for private polling
Scanned documents
Fax to Mailbox
iFAX received
Available Outgoing processing
Printing, Fax forwarding (up to 100 recipients), iFAX transmission (up
to 100 recipients
Printing, Fax forwarding (up to 100 recipients), iFAX transmission (up
to 100 recipients
Printing, Fax forwarding (up to 100 recipients), iFAX transmission (up
to 100 recipients
Printing, Fax forwarding (up to 100 recipients), iFAX transmission
depending on System Administration mode settings
94