Xerox WorkCentre 7300 Series Administrator's Manual page 60

3. To enable a digital certificate (if needed):
a. Click the [Properties] tab.
b. Click the [Security] folder, then the [Machine Digital Certificate Management] link.
c. Click the [Create New Self Signed Certificate] button.
The Machine Digital Certificate Management page refreshes and displays the Self -Signed
Certificate area.
d. In the the Self -Signed Certificate area, click [Apply].
4. To enable SSL:
a. Click the [Properties] tab.
b. Click the [Security] folder, then the [SSL/TLS Settings] link.
c. If prompted, type or enter your System Administrator user name and password.
• user name (default): 11111
• password ( default): x-admin
d. In the SSL/TLS Settings area, on the HTTP - SSL / TLS Communication line, click [Enabled].
e. Click [Apply].
f. If changes were made to the SSL settings you may need to:
• Reboot the system.
• Close and reopen the client browser.
5. To enable the ports:
a. Click the [Properties] tab.
b. Click the [Connectivity] folder, then Port Settings.
c. On the SNMP line, click [Enabled].
d. On the SMB line, click [Enabled].
e. On the FTP Client line, click [Enabled].
f. On the SOAP line, click [Enabled].
g. Click [Apply].
If changes were made to the SSL settings you may need to reboot the system.
6. To ensure that IPv4 is enabled by default:
a. Click the [Properties] tab.
b. Click the [Connectivity] folder, then the [Protocols] folder.
c. In the [Protocols] folder, click [TCP/IP].
d. In the IP Mode area, on the IP Mode line, click or verify IPv4.
e. If you clicked IPv4, click [Apply].
EIP applications can now register to the device.
f. You may need to map buttons to Custom Services at the Local User Interface in order to see the
new applications.
48