Configure Remote Authentication For Kerberos (Windows 2000); At Your Workstation; Configure Remote Authentication For Kerberos (Solaris) - Xerox WorkCentre 7300 Series Administrator's Manual

Configure Remote Authentication for Kerberos (Windows 2000)

At your Workstation:

1. With the Authentication Configuration web page still running, click Configure next to the server you
wish to use for Authentication. If not still running, perform steps 2 and 3 below.
2. If the web page is not still running, open your Web browser and enter the TCP/IP address of the
machine in the Address or Location field. Press Enter.
3. Click the Properties tab and return to the Security folder.
4. Select the Remote Authentication Server / Directory Service folder in the list of hot links, select
Authentication System and pick Kerberos (Solaris) from the drop-down list. Click Apply.
5. Select Kerberos Server Settings.
6. Enter the IP Address of the Primary Server (Domain Controller running the Key Distribution Center
service).
7. Enter the IP Address of the Secondary Server (Domain Controller), if necessary.
8. Enter details of the Windows 2000 Domain in the Realm Name box. For example: example.com.
9. Enter details for up to 4 alternate Domain Controllers and backups, if required.
10. Click Apply, and supply the Administrator User name and password if prompted.

Configure Remote Authentication for Kerberos (Solaris)

At Your Workstation:
1. With the Authentication Configuration web page still running, click Configure next to the server you
wish to use for Authentication. If not still running, perform steps 2 and 3 below.
2. If the web page is not still running, open your Web browser and enter the TCP/IP address of the
machine in the Address or Location field. Press Enter.
3. Click the Properties tab and return to the Security folder.
4. Select the Remote Authentication Server / Directory Service folder in the list of hot links, select
Authentication System and pick Kerberos (Solaris) from the drop-down list. Click Apply.
5. Select Kerberos Server Settings.
6. Enter the IP Address of the Primary Server (the server running the Key Distribution Center service).
7. Enter the IP Address of the Secondary Server, if necessary.
8. Enter details for the Realm. For example (in upper case): EXAMPLE.COM.
9. Enter details for up to 4 alternate servers and backups, if required.
10. Click Apply, and supply the Administrator User name and password if prompted.
114