Xerox WorkCentre 7300 Series Administrator's Manual page 97

• Starting Rate – Select G3 Auto or Forced4800bps.
• Delayed Start – Start Time. This can be a useful feature for saving time-based phone charges.
• Transmission Header Text. Select On or Off. This adds the sender name and phone number to
faxes.
• Confirmation Options. Select On or Off. If set to On a report will print when transmission
completes successfully.
• Delivery Receipts/Read Receipts.
• IFax Profile.
• Ifax Subject.
8. Touch Close until the Fax Mode Settings selections are again displayed.
9. Touch Fax Control.
10. Select the Line to enter or change, then touch Change Settings. Touch Save to save any new
settings.
• Re-enter Recipients
• Re-enter Broadcast Recipients
• Re-enter Speed Dial Recipients
• Transmission Header Text – Polling. You can leave this setting at its default value.
• Documents for Polling – Auto Delete. Set as desired to delete documents from Mailboxes after
polling same.
• Rotate 90 degrees.
• Sender ID.
• Save Undelivered Faxes.
• Save Deleted Faxes.
• Saved Faxes – Auto Delete.
• Transmission Interval.
• Batch Send.
• Manual Send/Receive Default. Select the default setting for manual Fax operations.
• Fax Receiving Mode. Leave this setting at Auto Receive for unattended operation.
• Border Limit.
• Auto Reduce on Receipt.
• Tray for Printing Incoming Faxes.
• 2 Pages up on Receipt.
• 2 Sided Print.
• Edge Erase – Top & Bottom Edges.
• Edge Erase – Left & Right Edges.
• Reduce 8.5x11 Original to A4.
• Pseudo-Photo Gradation Mode
• Box Selector - Line Setup. Enable this setting to enable Fax Mailboxes to receive incoming faxes.
• Memory Full Procedure.
• Maximum Stored Pages.
85