Configuring Ospf Dr Election - HP 4800G Series Configuration Manual

0.0.0.0/0
10.2.1.0/24
10.4.1.0/24
Total Nets: 3
Intra Area: 2
4) Configure Switch C to redistribute static routes.
[SwitchC] ip route-static 3.1.3.1 24 11.1.1.1
[SwitchC] ospf
[SwitchC-ospf-1] import-route static
[SwitchC-ospf-1] quit
# Display OSPF routing information on Switch D.
[SwitchD-ospf-1] display ospf routing
OSPF Process 1 with Router ID 10.5.1.1
Routing for Network
Destination
10.2.1.0/24
10.3.1.0/24
10.4.1.0/24
10.5.1.0/24
10.1.1.0/24
Routing for ASEs
Destination
3.1.3.0/24
Total Nets: 6
Intra Area: 2
You can see on Switch D an external route imported from the NSSA area.

Configuring OSPF DR Election

Network requirements
In the following figure, OSPF Switches A, B, C and D reside on the same network segment.
It is required to configure Switch A as the DR, and configure Switch C as the BDR.
65536 Inter
65535 Transit 10.2.1.2
3 Stub
Inter Area: 1 ASE: 0
Routing Tables
Cost Type
22 Inter
10 Transit 10.3.1.2
25 Inter
10 Stub
12 Inter
Cost Type
1 Type2
Inter Area: 3 ASE: 1
10.2.1.1 10.2.1.1
10.4.1.1
10.4.1.1 10.4.1.1
NSSA: 0
NextHop AdvRouter
10.3.1.1 10.3.1.1
10.3.1.1
10.3.1.1 10.3.1.1
10.5.1.1 10.5.1.1
10.3.1.1 10.3.1.1
Tag NextHop
1 10.3.1.1
NSSA: 0
1-58
0.0.0.1
0.0.0.1
0.0.0.1
Area
0.0.0.2
0.0.0.2
0.0.0.2
0.0.0.2
0.0.0.2
AdvRouter
10.2.1.1