Displaying And Maintaining Link Aggregation - HP 4800G Series Configuration Manual

sharing mode. You can change the load sharing mode of a link aggregation group for different types of
traffic as needed.
Follow these steps to configure load sharing mode for link aggregation groups:
To do...
Enter system view
Configure the link
aggregation load
sharing mode
Currently, when you configure load sharing mode for link aggregation groups in system view, the switch
supports configuring hash keys in the following modes:
Use a source IP address, a destination IP address, a source MAC address, or a destination MAC
address alone as a hash key.
Combine a source IP address and a destination IP address, a source IP address and a source port
number, or a destination IP address and a destination port number to form a hash key.
Combine any two or all three of the following elements to form a hash key: ingress port number,
source MAC address, and destination MAC address.

Displaying and Maintaining Link Aggregation

To do...
Display the local system ID
Display the aggregation
group-specific load sharing
mode
Display link aggregation details
of ports
Display the summary
information of all aggregation
groups
Display detailed information of
aggregation groups
Clear the LACP statistics of
ports
Use the command...
system-view
link-aggregation
load-sharing mode
{ destination-ip |
destination-mac |
destination-port |
ingress-port | source-ip |
source-mac | source-port }
*
Use the command...
display lacp system-id
display link-aggregation
load-sharing mode
display link-aggregation
member-port [ interface-type
interface-number [ to interface-type
interface-number ] ]
display link-aggregation
summary
display link-aggregation verbose
[ bridge-aggregation
[ interface-number ] ]
reset lacp statistics [ interface
interface-type interface-number [ to
interface-type interface-number ] ]
1-10
Remarks
—
Optional
By default, the hash keys for Layer 2 packets
are source/destination MAC addresses, and
those for Layer-3 packets are
source/destination IP addresses.
The setting you made applies to all
load-sharing link aggregation groups.
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view
Remarks