Configuring The Bims Server Information For The Client; Configuring Gateways For The Client - HP 4800G Series Configuration Manual

h (hybrid)-node: A combination of peer-to-peer first and broadcast second. The h-node client
unicasts the destination name to the WINS server, if no response is received, then broadcasts it to
get the destination IP address.
Follow these steps to configure WINS servers and NetBIOS node type in the DHCP address pool:
To do...
Enter system view
Enter DHCP address pool view
Specify WINS server IP
addresses for the client
Specify the NetBIOS node type
If b-node is specified for the client, you do not need to specify any WINS server address.

Configuring the BIMS Server Information for the Client

A DHCP client performs regular software update and backup using configuration files obtained from a
branch intelligent management system (BIMS) server. Therefore, the DHCP server needs to offer
DHCP clients the BIMS server IP address, port number, shared key from the DHCP address pool.
Follow these steps to configure the BIMS server IP address, port number, and shared key in the DHCP
address pool:
To do...
Enter system view
Enter DHCP address pool view
Specify the BIMS server IP
address, port number, and
shared key

Configuring Gateways for the Client

DHCP clients that want to access hosts outside the local subnet request gateways to forward data. You
can specify gateways in each address pool for clients and the DHCP server will assign gateway
addresses while assigning an IP address to the client. Up to eight gateways can be specified in a DHCP
address pool.
Use the command...
system-view
dhcp server ip-pool
pool-name [ extended ]
nbns-list
ip-address&<1-8>
netbios-type { b-node |
h-node | m-node | p-node }
Use the command...
system-view
dhcp server ip-pool pool-name
[ extended ]
bims-server ip ip-address [ port
port-number ] sharekey key
2-9
Remarks
—
—
Required (optional for b-node)
No address is specified by default.
Required
Not specified by default.
Remarks
—
—
Required
Not specified by default.