Wds; Wds Link; Basic - TRENDnet TEW-821DAP User Manual

TRENDnet User's Guide

WDS

WDS Link

Wireless (2.4GHz or 5GHz) > WDS Link Settings
This section outlines the available features to configure for both wireless 2.4Ghz and
5GHz when Access Point mode is selected.
1. Log into your management page (see
2. Click on the wireless band you would like to configure and click Wireless Network.
3. Configure the below settings and click Apply to save settings.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access the management page" on page 16).
 Site Survey: Click this option to scan for available WDS networks
 Remote AP MAC: Enter the MAC address of the remote access point you want to
establish WDS connection.
 Security Mode: Select from the pull down menu the wireless security that is used
on the wireless network you would like to connect to.

Basic

Wireless (2.4GHz or 5GHz) > Wireless Network
This section outlines the available features to configure for both wireless 2.4Ghz and
5GHz when Access Point mode is selected.
1. Log into your management page (see
2. Click on the wireless band you would like to configure and click Wireless Network.
3. Configure the below settings and click Apply to save settings.
TEW-821DAP
"Access the management page" on page 16).
22