Yamaha YZ250F(W) Owner's Service Manual page 554

HANDLEBAR
2. Install:
• Handlebar 1
• Handlebar upper holder 2
• Bolt (handlebar upper holder) 3
NOTE:
• The handlebar upper holder should be
installed with the punched mark a forward.
• Install the handlebar so that the marks b are
in place on both sides.
• Install the handlebar so that the projection c
of the handlebar upper holder is positioned
at the mark on the handlebar as shown.
• First tighten the bolts on the front side of the
handlebar upper holder, and then tighten the
bolts on the rear side.
3. Tighten:
• Nut (handlebar lower holder) 1
5 - 45
CHAS
28 Nm (2.8 m · kg, 20 ft · lb)
34 Nm (3.4 m · kg, 25 ft · lb)