1 Hot starter cable
2 Radiator hose 2
3 Clamp
4 Ignition coil lead
5 Throttle position sensor lead
6 Hump (frame)
7 Oil hose
8 Hose guide
9 Neutral switch lead
0 CDI magneto lead
A Clutch cable
B Radiator breather hose
C Engine stop switch lead
CABLE ROUTING DIAGRAM
D Sub-wire harness
E CDI unit bracket
F CDI unit
G Throttle cable
H Cylinder head breather hose
È Fasten the hot starter cable,
throttle cables, throttle position
sensor lead and ignition coil
lead.
É Fasten the throttle position
sensor lead behind the hump
of the frame.
2 - 22
SPEC
Ê Fasten the neutral switch lead
on the oil hose.
Ë Pass the neutral switch lead on
the inside of the oil hose.
Ì Fasten the neutral switch lead,
CDI magneto lead and radiator
breather hose.
Í Fasten the neutral switch lead,
CDI magneto lead, radiator
breather hose and clutch cable
over the radiator mounting
boss.