Yamaha YZ250F(W) Owner's Service Manual page 148

È Insert the end of the fuel tank breather hose into
the hole in the steering stem.
É Install the connector cover so that it does not
come in between the radiator hose 1 and radia-
tor.
Ê Aligh the paint mark on the cylinder head
breather hose with the front end of the hose
guide.
Ë Pass the cylinder head breather hose on the out-
side of the radiator hose 1 and then between the
radiator 4 and frame.
CABLE ROUTING DIAGRAM
Ì Pass the clutch cable through the cable guide.
Í Pass the clutch cable in front of the radiator
mounting boss.
Î Pass the fuel hose between the hot starter cable
and throttle position sensor lead.
Ï Pass the carburetor breater hoses so that they
are not pinched between the upper engine
bracket and carburetor.
Ð Pass the carburetor breather hoses and over-
flow hose so that all there hoses do not contact
the rear shock absorber.
2 - 21
SPEC