Reverting To A Default Snmp Community String; Deleting A Fabric - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

12. Enter a context name In the Context Name field.
13. Select the authorization protocol in the Auth Protocol field.
14. Enter the authorization password in the Auth Password field.
15. Select the privacy protocol in the Priv Protocol field.
16. Enter the privacy password in the Priv Password field.
17. Click OK on the Address Properties dialog box.
18. Click OK on the Discover Setup dialog box.

Reverting to a default SNMP community string

1. Select Discover > Setup.
2. Select an IP address from the Available Addresses table.
3. Click Edit.
4. Click the SNMP tab.
5. Click Default 'public' and Default 'private.'
6. Click OK on the Address Properties dialog box.
7.

Deleting a fabric

If you decide you no longer want the Management application to discover and monitor a specific
fabric, you can delete it. Deleting a fabric also deletes the fabric data on the server (both system
collected and user-defined data) except for user-assigned names for the device port, device node,
and device enclosure information.
To delete a fabric, complete the following steps.
1. Select Discovery > Setup.
2. Select the fabric for which you want to delete from the Discovered Addresses table.
3. Click Delete.
DCFM Professional Plus User Manual
53-1001774-01
•
If you selected Configure for 256-Port_Director_Name, go to step 17.
•
If you did not select Configure for 256-Port_Director_Name, continue with step 15.
If the seed switch is not partitioned, continue with
If the seed switch is partitioned, the Undiscovered Seed Switches dialog box displays.
a. Select the Select check box for each undiscovered seed switch to discover their fabrics.
b. Click OK on the Undiscovered Seed Switches dialog box.
The Discover Setup dialog box displays.
The Address Properties dialog box displays.
Click OK on the Discover Setup dialog box.
The Discover Setup dialog box displays.
You are prompted to confirm that you want to delete the fabric.
step 18.
2
41