General Tab - Brocade Communications Systems Brocade 8/12c Administrator's Manual

General tab

The General tab is viewed from the Encryption Group Properties dialog box. To access the General
tab, select a group from the Encryption Center Devices table, then select Group > Properties from
the menu task bar, or right-click a group and select Properties.
NOTE
You can also select a group from the Encryption Center Devices table, then click the Properties icon.
FIGURE 82
The General tab displays the following properties:
•
•
•
•
•
•
•
•
Fabric OS Encryption Administrator's Guide
53-1002159-03
•
"HA Clusters tab" on page 104
•
"Tape Pools tab" on page 105
•
"Engine Operations tab"
Encryption Group Properties dialog box - General tab
Encryption group name - the name of the encryption group.
Group status - the status of the encryption group, which can be OK-Converged or Degraded.
Degraded means the group leader cannot contact all of the configured group members.
Deployment mode - the group's deployment mode, which is transparent.
Failback mode - The group's failback mode, which can be automatic or manual. The failback
mode can be changed by clicking on the field and selecting the desired mode.
Primary Key Vault IP address - The IP address of the primary key vault, either IPv4 or host
name.
Primary Key Vault Connection Status - the status of the connection to the primary key vault. In
an operating environment, the status should be Connected.
Backup key vault IP address - the IP address of the backup key vault.
Backup Key Vault Connection Status - the status of the connection to the backup key vault, if a
backup is configured.
Viewing and editing group properties
on page 107
2
99