Configuring The Snmp Service On Windows - HP Data Protector A.06.11 Integration Manual

3. Configure the SNMP Service on a Windows system to send traps to the
Operations Manager Server. The community name should be public (the
default community name that Data Protector SNMP traps use). The trap destination
must be the IP address or the hostname of the Operations Manager Server and
the rights of the community must be READ CREATE.
To use a custom community name other than public, set the value in the
Registry. Data Protector will then use this name for sending SNMP traps:
HKEY_LOCAL_MACHINE\SOFTWARE\HewlettPackard\OpenView\
OmniBackII\SNMPTrap CommunityREG_SZ:custom community name
Figure 3 Configuring the SNMP service on Windows
.
36 Installing the Data Protector Integration