Timer - HP 6125G Command Reference Manual

undo rrpp ring-group ring-group-id
View
System view
Default level
2: System level
Parameters
ring-group-id: RRPP ring group ID, which ranges from 1 to 8.
Description
Use rrpp ring-group to create an RRPP ring group and enter RRPP ring group view.
Use undo rrpp ring-group to delete an RRPP ring group.
RRPP configured with ring groups cannot interoperate with RRPP that does not support ring group
configuration.
When removing a ring group, do that on the edge node first and then on the assistant-edge node. If you
fail to follow the order, the assistant-edge node may fail to receive Edge-Hello packets and mistakenly
considers that the primary ring has failed.
After a ring group is removed, all subrings in the ring group do not belong to any ring group.
Related commands: domain ring and display rrpp ring-group.
Examples
# Create RRPP ring group 1 and enter its view.
<Sysname> system-view
[Sysname] rrpp ring-group 1
[Sysname-rrpp-ring-group1]

timer

Syntax
timer hello-timer hello-value fail-timer fail-value
undo timer
View
RRPP domain view
Default level
2: System level
Parameters
hello-value: Hello timer value, which ranges from 1 to 10 seconds.
fail-value: Fail timer value, which ranges from 3 to 30 seconds.
Description
Use timer to configure the Hello timer value and the Fail timer value for the RRPP domain.
Use undo timer to restore it to the default value.
By default, the Hello timer value is 1 second and the Fail timer value is 3 seconds.
74