Smart-Link Group - HP 6125G Command Reference Manual
High availability command reference
Hide thumbs
Also See for 6125G:
- Command reference manual (426 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] smart-link flush enable
smart-link group
Syntax
smart-link group group-id
undo smart-link group group-id
View
System view
Default level
2: System level
Parameters
group-id: Smart link group ID, which ranges from 1 to 26.
Description
Use smart-link group to create a smart link group and enter smart link group view.
Use undo smart-link group to remove a smart link group.
You cannot remove a smart link group with member ports.
Examples
# Create smart link group 1 and enter smart link group view.
<Sysname> system-view
[Sysname] smart-link group 1
[Sysname-smlk-group1]
84
Advertisement
Table of Contents
