HP 6125G Command Reference Manual page 119

Field
Become Master
Auth Type
Key
Virtual IP
Virtual MAC
Master IP
VRRP Track Information
Track Interface
Track Object
State
Pri Reduced
Switchover
# When VRRP operates in load balancing mode, display brief information about all VRRP groups on the
router.
<Sysname> display vrrp ipv6
IPv6 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 2
Interface
----------------------------------------------------------------------
Description
Time to wait before the router becomes the master. The unit is milliseconds.
Only routers in backup mode have such information.
Authentication type:
•
None—No authentication.
•
Simple—Simple text authentication.
Authentication key, which is displayed as asterisks (******).
Virtual IPv6 addresses of the VRRP group.
Virtual MAC address that corresponds to the virtual IPv6 address of the VRRP
group. It is displayed only when the router is in the state of master.
Primary IP address of the interface where the router in the state of master
resides.
Information of the tracked interface or track entry. It is displayed only when the
vrrp ipv6 vrid track or vrrp ipv6 vrid track interface command is executed.
Interface to be tracked. It is displayed only when the vrrp ipv6 vrid track
interface command is executed.
Track entry to be tracked. It is displayed only when the vrrp ipv6 vrid track
command is executed.
State of the tracked interface or track entry.
State of a tracked interface:
•
Up
•
Down
•
Removed
State of a track entry:
•
Invalid
•
Negative
•
Positive
•
Not existing
Priority value that is reduced when the monitored interface is down or
removed, or when the status of the monitored track entry turns to negative. It is
displayed only when the vrrp ipv6 vrid track interface or vrrp ipv6 vrid track
command is executed.
Switchover mode. If the status of the monitored track entry turns to negative,
the backup immediately switches to the master.
: Load Balance
: Virtual MAC
VRID State
114
Run Address
Pri
Active