HP 6125G Command Reference Manual page 102

Field
Config Weight
Running Weight
Forwarder 01
State
Virtual MAC
Owner ID
Priority
Active
Forwarder Weight Track
Configuration
Track Object
State
Weight Reduced
Forwarder Switchover Track
Information
Track Object
State
Member IP
Description
Configured weight of the VF, the value is 255.
Running weight of the VF (the current weight of the VF). When VF tracking
is configured, if the state of the monitored track entry changes, the weight of
the VF changes.
Information about VF 01.
State of a VF:
•
Active
•
Listening
•
Initialize
Virtual MAC address of the VF.
Real MAC address of the interface of the VF owner.
VF priority.
IP address of the interface of the AVF. If the current VF is the AVF, it is
displayed as local.
Weight track configuration of the VF. It is displayed only when the vrrp vrid
weight track command is executed.
Weight track entry. It is displayed only when the vrrp vrid weight track
command is executed.
A track entry has the following states:
•
Invalid
•
Negative
•
Positive
•
Not existing
Weight value that is reduced when the status of the monitored track entry
turns to negative. It is displayed only when the vrrp vrid weight track
command is executed.
VF switchover information.
The information is displayed only after the vrrp vrid track
forwarder-switchover command is executed.
Track entry monitored by the VF switchover feature.
The information is displayed only after the vrrp vrid track
forwarder-switchover command is executed.
A track entry has the following states:
•
Invalid
•
Negative
•
Positive
•
Not existing
IP address of the member switch.
If the status of the monitored track entry turns to negative and the local
device has an LVF whose corresponding AVF is on the specified member
switch, the LVF immediately becomes active.
97