HP 6125G Command Reference Manual page 96

Vlan2
Table 28 Command output (standard protocol mode)
Field
Run Mode
Run Method
Total number of virtual routers
Interface
VRID
Run Pri
Adver. Timer
Auth Type
Virtual IP
# When VRRP operates in standard protocol mode, display detailed information about all VRRP groups
on the router.
<Sysname> display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
VRRP Track Information:
Track Interface: Vlan3
Track Object
1 Master
Description
Current VRRP operation mode:
•
Standard—Standard protocol mode.
•
Load Balance—Load balancing mode.
Current VRRP running mode:
•
Real MAC—Real MAC mode. The virtual IP address of the VRRP group
is mapped to the real MAC address of the interface.
•
Virtual MAC—Virtual MAC mode. The virtual IP address of the VRRP
group is mapped to the virtual MAC address.
Number of VRRP groups.
Interface to which the VRRP group belongs.
ID of the VRRP group.
Running priority of the router (the current priority of the router). With
VRRP tracking configured, when the state of the monitored interface or
track entry changes, the priority of the router changes.
VRRP advertisement interval, in seconds.
Authentication type:
•
None—No authentication.
•
Simple—Simple text authentication.
•
MD5—MD5 authentication.
Virtual IP address of the VRRP group.
: Standard
: Virtual MAC
: 1 Adver Timer
: Up State
: 150 Running Pri
: Yes Delay Time
: Simple Key
: 1.1.1.1
: 0000-5e00-0101
: 1.1.1.2
State : Down
: 1 State : Positive
91
140 1 Simple
: 1
: Master
: 140
: 5
: ******
1.1.1.1
Pri Reduced : 10
Pri Reduced : 50