HP 6125G Command Reference Manual page 55

Neighbor aged time : 13
Interface GigabitEthernet1/1/4
DLDP port state : advertisement
DLDP link state : up
The neighbor number of the port is 1.
Neighbor mac address : 0000-0000-1100
Neighbor port index : 81
Neighbor state : two way
Neighbor aged time : 12
# Display the DLDP configuration of GigabitEthernet 1/1/3.
<Sysname> display dldp gigabitethernet 1/1/3
Interface GigabitEthernet1/1/3
DLDP port state : advertisement
DLDP link state : up
The neighbor number of the port is 1.
Neighbor mac address : 0000-0000-0100
Neighbor port index : 79
Neighbor state : two way
Neighbor aged time : 13
Table 19 Command output
Field
DLDP global status
DLDP interval
DLDP work-mode
DLDP authentication-mode
password
DLDP unidirectional-shutdown
DLDP delaydown-timer
The number of enabled ports
Interface
DLDP port state
Description
Global DLDP state (enable or disable).
Interval for sending Advertisement packets (in seconds) to maintain
neighbor relations.
DLDP mode (enhance or normal).
DLDP authentication mode (none, simple, or md5).
Password for DLDP authentication, which is displayed as asterisks
(******).
Port shutdown mode (auto or manual) after unidirectional links are
detected.
Setting of the DelayDown timer.
Number of the DLDP-enabled ports.
Index of a DLDP-enabled port.
DLDP state on a port:
•
initial
•
inactive
•
active
•
advertisement
•
probe
•
disable
•
disable (loopback)—The port is in disable state because it has
received loopback packets.
•
delaydown
50