Vrrp Vrid Track Interface - HP 6125G Command Reference Manual

If forwarder-switchover member-ip ip-address, reduced priority-reduced, and switchover are not
specified, the priority of the router in the VRRP group decreases by 10 when the track entry changes to
negative.
When the track entry changes from negative to positive or invalid, the router automatically restores its
priority.
You must create the VRRP group and assign a virtual IP address to it before you can associate it with any
track entry.
The vrrp vrid track command cannot take effect on an IP address owner. If you have configured the
command on an IP address owner, the configuration takes effect after the router changes to be a non IP
address owner.
You can create a track entry with the track command before or after you associate it with a VRRP group.
For more information about configuring track entries, see High Availability Configuration Guide.
Related commands: vrrp vrid track interface and display vrrp.
Examples
# Associate VRRP group 1 on VLAN-interface 2 with track entry 1 and decrease the priority of the router
in the VRRP group by 50 when the state of track entry 1 changes to negative.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] vrrp vrid 1 virtual-ip 10.1.1.1
[Sysname-Vlan-interface2] vrrp vrid 1 track 1 reduced 50
# Associate VRRP group 1 on VLAN-interface 2 with track entry 2 and enable the VF in listening state
whose AVF is on the member device with the IP address of 10.1.1.3 to take over as the AVF immediately
after the specified track entry changes to the negative state.
[Sysname-Vlan-interface2] vrrp vrid 1 track 2 forwarder-switchover member-ip 10.1.1.3

vrrp vrid track interface

Syntax
vrrp vrid virtual-router-id track interface interface-type interface-number [ reduced priority-reduced ]
undo vrrp vrid virtual-router-id track [ interface interface-type interface-number ]
View
Interface view
Default level
2: System level
Parameters
virtual-router-id: VRRP group number, which ranges from 1 to 255.
interface interface-type interface-number: Specifies an interface by its type and number.
reduced priority-reduced: Value by which the priority decrements. priority-reduced ranges from 1 to 255
and defaults to 10.
Description
Use vrrp vrid track interface to configure to track the specified interface.
Use undo vrrp vrid track interface to disable tracking the specified interface.
108