Ring Enable; Rrpp Domain - HP 6125G Command Reference Manual

[Sysname-rrpp-domain1] ring 10 node-mode transit primary-port gigabitethernet 1/0/1
secondary-port gigabitethernet 1/0/2 level 0
[Sysname-rrpp-domain1] ring 20 node-mode assistant-edge edge-port gigabitethernet 1/0/3

ring enable

Syntax
ring ring-id enable
undo ring ring-id enable
View
RRPP domain view
Default level
2: System level
Parameters
ring-id: RRPP ring ID, which ranges from 1 to 64.
Description
Use ring enable to enable the RRPP ring.
Use undo ring enable to disable the RRPP ring.
By default, the RRPP ring is disabled.
To activate the RRPP domain, enable the RRPP protocol and the RRPP rings for the RRPP domain.
Related commands: rrpp enable.
Examples
# Enable RRPP ring 10 in RRPP domain 1.
<Sysname> system-view
[Sysname] rrpp domain 1
[Sysname-rrpp-domain1] control-vlan 100
[Sysname-rrpp-domain1] protect-vlan reference-instance 0 1 2
[Sysname-rrpp-domain1] ring 10 node-mode master primary-port gigabitethernet 1/0/1
secondary-port gigabitethernet 1/0/2 level 0
[Sysname-rrpp-domain1] ring 10 enable

rrpp domain

Syntax
rrpp domain domain-id
undo rrpp domain domain-id
View
System view
Default level
2: System level
72