Vrrp Vrid Preempt-Mode - HP 6125G Command Reference Manual

View
Interface view
Default level
2: System level
Parameters
virtual-router-id: VRRP group number, which ranges from 1 to 255.
md5: Specifies the MD5 authentication mode.
simple: Specifies the simple authentication mode.
cipher: Sets a ciphertext authentication key.
key: Set the authentication key. This argument is case sensitive.
When md5 authentication applies, it must be a plaintext string of 1 to 8 characters or a ciphertext
•
string of 24 characters if the cipher keyword is not specified; or a ciphertext string of 1 to 41
characters if the cipher keyword is specified.
When simple authentication applies, it must be a plaintext string of 1 to 8 characters if the cipher
•
keyword is not specified; or a ciphertext string of 1 to 41 characters if the cipher keyword is
specified.
Description
Use vrrp vrid authentication-mode to configure authentication mode and authentication key for a VRRP
group to send and receive VRRP packets.
Use undo vrrp vrid authentication-mode to restore the default.
By default, authentication is disabled.
For secrecy, all keys, including keys configured in plain text, are saved in cipher text.
Before executing the command, create a VRRP group on an interface and configure the virtual IP address
of the VRRP group.
You can configure different authentication modes and authentication keys for the VRRP groups on an
interface. However, the members of the same VRRP group must use the same authentication mode and
authentication key.
Related commands: display vrrp.
Examples
# Set the authentication mode to simple and authentication key to Sysname for VRRP group 1 on
VLAN-interface 2 to send and receive VRRP packets.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] vrrp vrid 1 virtual-ip 10.1.1.1
[Sysname-Vlan-interface2] vrrp vrid 1 authentication-mode simple Sysname

vrrp vrid preempt-mode

Syntax
vrrp vrid virtual-router-id preempt-mode [ timer delay delay-value ]
undo vrrp vrid virtual-router-id preempt-mode [ timer delay ]
104