Display Bfd Session - HP 6125G Command Reference Manual

Table 40 Command output
Field
Interface
Session Num
Min Trans Inter
Min Recv Inter
DetectMult
Min Echo Recv Inter
Auth mode
LD
RD
SourceAddr
DestAddr
ConnType
State
Mode

display bfd session

Syntax
display bfd session [ slot slot-number [ all | verbose ] | verbose ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
verbose: Displays detailed session information.
slot slot-number: Displays session information for the specified IRF member switch. The slot-number
argument represents the IRF member ID of the device. If no member switch is specified, the command
displays session information for all IRF member switches.
all: Displays detailed information about all BFD sessions on the IRF member switch, including those not
maintained by the switch.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
Description
Interface name.
Number of sessions established on the local interface.
Minimum control packet transmit interval configured on the interface.
Minimum control packet receive interval configured on the interface.
Detection time multiplier.
Minimum echo packet receive interval configured on the interface.
Session authentication mode: simple, MD5, SHA-1, or none.
Local ID of the session.
Remote ID of the session.
Source IP address of the session.
Destination IP address of the session.
Connection type of the interface.
Session state.
Working mode of the session: control (Ctrl) mode or echo (Echo) mode.
140