HP 6125G Command Reference Manual page 45

High availability command reference
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

Current state: CCI_WAITING
Interval: 1s
Loopback:
NextSeqNumber: 8877
SendLBR: 0
Linktrace:
NextSeqNumber: 8877
SendLTR: 0
No CCM from some remote MEPs is received.
One or more streams of error CCMs is received. The last-received CCM:
Maintenance domain: (Without Name)
Maintenance association:matest1
MEP:5
Sequence Number:0x50A
Received Time: 02/3/6 13:01:34
One or more streams of cross-connect CCMs is received. The last-received CCM:
Maintenance domain:mdtest1
Maintenance association:matest1
MEP:6
Sequence Number:0x63A
Received Time: 02/3/6 13:01:34
Some other MEPs are transmitting the RDI bit.
Table 14 Command output
Field
Interface
Maintenance domain
Maintenance association
Level
VLAN
Direction
Administrative state
CCM send
FNG state
SendCCM: 12018
ReceiveInOrderLBR: 0
ReceiveLTM: 0
Description
Interface that an MD belongs to.
MD that a MEP belongs to. (If the MD does not have a name, this field is
displayed as Without Name.)
MA to which a MEP belongs.
Level of the MD.
VLAN to which the MA belongs.
Direction of the MEPs.
State of MEP, either Active or Inactive.
Whether the MEP sends CCM.
State of FNG (Fault Notification Generator):
FNG_RESET
FNG_DEFECT
FNG_REPORT_DEFECT
FNG_DEFECT_REPORTED
FNG_DEFECT_CLEARING
A hyphen (-) means not supported.
ReceiveOutOrderLBR: 0
40

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents