Display Rrpp Brief - HP 6125G Command Reference Manual

display rrpp brief

Syntax
display rrpp brief [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display rrpp brief to display the brief RRPP information.
Examples
# Display the brief RRPP information.
<Sysname> display rrpp brief
Flags for Node Mode :
M –- Master , T -- Transit , E -- Edge , A -- Assistant-Edge
RRPP Protocol Status: Enable
Number of RRPP Domains: 2
Domain ID
Control VLAN
Protected VLAN: Reference Instance 0 to 2, 4
Hello Timer
Ring Ring
ID Level
--------------------------------------------------------------------------------
1 1
Domain ID
Control VLAN
Hello Timer
Protected VLAN: Reference Instance 0 to 2, 4
Ring Ring
ID Level
--------------------------------------------------------------------------------
1 0
: 1
: Major 5 Sub 6
: 1 sec Fail Timer : 3
Node Primary/Common
Mode Port
M GE1/0/1
: 2
: Major 10 Sub 11
: 1 sec Fail Timer : 3
Node Primary/Common
Mode Port
T GE1/0/3
sec
Secondary/Edge
Port
GE1/0/2
sec
Secondary/Edge
Port
GE1/0/4
59
Enable
Status
Yes
Enable
Status
Yes