Enable Status : Yes
Primary port
: GE1/0/4
Secondary port: GE1/0/5
Ring ID
: 2
Ring Level
: 1
Node Mode
: Edge
Ring State
: -
Enable Status : No
Common port
: GE1/0/4
GE1/0/5
Edge port
: GE1/0/3
Table 24 Command output
Field
Domain ID
Control VLAN
Protected VLAN
Hello Timer
Fail Timer
Ring ID
Ring Level
Node Mode
Ring State
Enable Status
Active Status: Yes
Active Status: No
Description
RRPP domain ID.
Control VLANs of the RRPP domain:
•
Major—Represents the primary control VLAN.
•
Sub—Represents the secondary control VLAN.
List of VLANs protected by the RRPP domain. MSTIs are displayed here. To
get the VLANs corresponding to these MSTIs, use the display stp
region-configuration command.
Hello Timer value in seconds.
Fail Timer value in seconds.
RRPP ring ID.
RRPP ring level:
•
0 representing primary ring.
•
1 representing subring.
Node mode:
•
Master node.
•
Transit node.
•
Edge node.
•
Assistant edge node.
RRPP ring state:
•
Complete—The ring is healthy.
•
Failed—The ring is not closed.
If the ring is not enabled on the device working as the master node or the
device is not the master node of the ring, a hyphen (-) is displayed.
RRPP ring enable status:
•
Yes for enabled.
•
No for disabled.
66
Port status: UP
Port status: BLOCKED
Port status: -
Port status: -
Port status: -