HP 6125G Command Reference Manual page 42

Parameters
ma-name: Name of MA, a character string of 1 to 43 characters. IEEE 802.1ag standard version allows
an MA name to contain letters, numbers, and special characters (including ~ ! @ # $ % ^ & * ( ) - _ +
= { } [ ] | \ : ; " ' < > , . /). IEEE 802.1ag draft5.2 version and IEEE 802.1ag draft5.2 interim version
allow an MA name to contain letters, numbers, and special characters (including – and _), but do not
allow an MA name to start or end with a special character.
md-name: Name of an MD, a character string of 1 to 43 characters. IEEE 802.1ag standard version
allows an MD name to contain letters, numbers, and special characters (including ~ ! @ # $ % ^ & * ( )
- _ + = { } [ ] | \ : ; " ' < > , . /). IEEE 802.1ag draft5.2 version and IEEE 802.1ag draft5.2 interim version
allow an MD name to contain letters, numbers, and special characters (including – and _), but do not
allow an MD name to start or end with a special character.
level level-value: MD level, which ranges from 0 to 7.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display cfd ma to display the configuration of a specified MA.
If MD is not specified, this command displays the MA configurations of all MDs on the device.
If both MD and MA are specified, this command displays the specified MA configuration.
If only MD is specified, this command displays the configurations of all MAs in that MD.
If an MD does not have a name, you can specify it only by the MD level.
Examples
# Display the MA configuration information in all MDs.
<Sysname> display cfd ma
3 maintenance domain(s) configured.
Maintenance domain: mdtest_5
1 maintenance association(s) belong(s) to this maintenance domain:
Maintenance association: matest_5
Service instance: 5
Maintenance domain: mdtest_6
1 maintenance association(s) belong(s) to this maintenance domain:
Maintenance association: matest_6
Service instance: 6
Maintenance domain: (Without Name)
1 maintenance association(s) belong(s) to this maintenance domain:
Maintenance association: matest_7
Service instance: 7
VLAN: 5 Level: 5
VLAN: 6 Level: 6
VLAN: 7 Level: 7
37