display rrpp statistics
Syntax
display rrpp statistics domain domain-id [ ring ring-id ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
domain-id: RRPP domain ID, which ranges from 1 to 8.
ring-id: RRPP ring ID, which ranges from 1 to 64.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display rrpp statistics to display RRPPDU statistics.
If an RRPP ring ID is specified, this command displays RRPPDU statistics for the specified RRPP ring in the
specified RRPP domain. If not, this command displays RRPPDU statistics for all RRPP rings in the specified
RRPP domain.
If a port belongs to more than one ring, this command collects and displays its RRPPDU statistics by ring.
When a ring transits from inactive to active, packet counting for the ring restarts.
Related commands: reset rrpp statistics.
Examples
# Display the RRPPDU statistics for ring 1 in RRPP domain 1.
<Sysname> display rrpp statistics domain 1 ring 1
Ring ID
Ring Level
Node Mode
Active Status : Yes
Primary port
Packet
Direct Hello
------------------------------------------------------------------------------
Send
16424
Rcv
0
Secondary port: GE1/0/2
Packet
: 1
: 1
: Master
: GE1/0/1
Link
Common
Down
Flush FDB
0
0
0
0
Link
Common
Complete
Edge
Flush FDB
Hello
1
0
0
0
Complete
Edge
62
Major
Packet
Fault
Total
0
16425
0
0
Major
Packet