Cfd Enable - HP 6125G Command Reference Manual

service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767.
Description
Use cfd cc interval to set the value of the interval field in the CCM messages.
Use undo cfd cc interval to restore default.
By default, the value of this field is 4 for all CCMs sent.
The relationship between the interval field value in the CCM messages, the interval for sending CCM
messages, and the timeout time of the remote MEP is shown in
Table 7 Relationship of interval field value, interval for sending CCMs, and timeout time of remote MEP
Interval field value
4
5
6
7
Related commands: cfd cc enable.
Examples
# Set the value of the interval field in CCMs sent by MEPs in service instance 2 to 7.
<Sysname> system-view
[Sysname] cfd cc interval 7 service-instance 2

cfd enable

Syntax
cfd enable
undo cfd enable
View
System view
Default level
2: System level
Parameters
None
Description
Use cfd enable to enable CFD.
Use undo cfd enable to disable CFD.
By default, CFD is disabled.
Examples
# Enable CFD.
<Sysname> system-view
[Sysname] cfd enable
Interval for sending CCMs
1 second
10 seconds
60 seconds
600 seconds
20
Table 7.
Timeout time of remote MEP
3.5 seconds
35 seconds
210 seconds
2100 seconds