Vrrp Ipv6 Dscp; Vrrp Ipv6 Method - HP 6125G Command Reference Manual

Parameters
interface interface-type interface-number: Clears VRRP group statistics of a specific interface.
interface-type interface-number specifies an interface by its type and number.
vrid virtual-router-id: Clears VRRP statistics of the specified VRRP group. virtual-router-id specifies a VRRP
group by its group number, which ranges from 1 to 255.
Description
Use reset vrrp ipv6 statistics to clear VRRP group statistics.
If you specify both an interface and a VRRP group, the command clears the statistics about the specified
VRRP group on the specified interface. If you specify only an interface, the command clears the statistics
about all VRRP groups on the interface. If you specify neither, the command clears statistics about all
VRRP groups on the router.
Related commands: display vrrp ipv6 statistics.
Examples
# Clear the statistics about all the VRRP groups on the router.
<Sysname> reset vrrp ipv6 statistics

vrrp ipv6 dscp

Syntax
vrrp ipv6 dscp dscp-value
undo vrrp ipv6 dscp
View
System view
Default level
2: System level
Parameters
dscp-value: Sets the DSCP value for VRRP packets, in the range of 0 to 63.
Description
Use vrrp ipv6 dscp to set the DSCP value for VRRP packets.
Use undo vrrp ipv6 dscp to restore the default.
By default, the DSCP value in VRRP packets is 56.
Examples
# Set the DSCP value for VRRP packets to 30.
<Sysname> system-view
[Sysname] vrrp ipv6 dscp 30

vrrp ipv6 method

Syntax
vrrp ipv6 method { real-mac | virtual-mac }
undo vrrp ipv6 method
123