Cfd Mep Enable; Cfd Meplist - HP 6125G Command Reference Manual

[Sysname] cfd service-instance 5 md test_md ma test_ma
[Sysname] cfd meplist 3 service-instance 5
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] cfd mep 3 service-instance 5 inbound

cfd mep enable

Syntax
cfd mep service-instance instance-id mep mep-id enable
undo cfd mep service-instance instance-id mep mep-id enable
View
Layer 2 Ethernet interface view
Default level
2: System level
Parameters
service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767.
mep mep-id: Specifies the ID of a MEP, ranging from 1 to 8191.
Description
Use cfd mep enable to enable the MEP configured on a port.
Use undo cfd mep enable to disable the MEP.
By default, MEP is disabled on a port and cannot respond to various CFD frames (such as LTM frames
and LBM frames) unless you enable it.
Related commands: cfd mep.
Examples
# Enable MEP 3 in service instance 5 on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] cfd mep service-instance 5 mep 3 enable

cfd meplist

Syntax
cfd meplist mep-list service-instance instance-id
undo cfd meplist mep-list service-instance instance-id
View
System view
Default level
2: System level
27