Telnet Client Ipv6 Dscp; Telnet Client Source - HP 6125G Command Reference Manual

Examples
# Set the DSCP value for IPv4 to use for outgoing Telnet packets to 30 on a Telnet client.
<Sysname> system-view
[Sysname] telnet client dscp 30

telnet client ipv6 dscp

Syntax
telnet client ipv6 dscp dscp-value
undo telnet client ipv6 dscp
View
System view
Default level
2: System level
Parameters
dscp-value: Specifies a DSCP value in the range of 0 to 63.
Description
Use telnet client ipv6 dscp to set the DSCP value for IPv6 to use for outgoing Telnet packets on a Telnet
client.
Use undo telnet client ipv6 dscp to restore the default.
By default, IPv6 uses the DSCP value 0 for outgoing Telnet packets on a Telnet client.
Examples
# Set the DSCP value for IPv6 to use for outgoing Telnet packets to 30 on a Telnet client.
<Sysname> system-view
[Sysname] telnet client ipv6 dscp 30

telnet client source

Syntax
telnet client source { interface interface-type interface-number | ip ip-address }
undo telnet client source
View
System view
Default level
2: System level
Parameters
interface interface-type interface-number: Specifies the source interface. The source IPv4 address of the
Telnet packets sent is the IPv4 address of the specified interface. interface-type interface-number
represents the interface type and number.
ip ip-address: Specifies the source IPv4 address of Telnet packets.
45