Reset Counters Interface; Service - HP 6125XLG Command Reference Manual

<Sysname> system-view
[Sysname] interface tunnel 1
[Sysname-Tunnel1] mtu 10000
Related commands
display interface tunnel

reset counters interface

Use reset counters interface to clear the statistics of tunnel interfaces.
Syntax
reset counters interface [ tunnel [ number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
number: Tunnel interface number.
Usage guidelines
Use this command to clear old statistics so you can observe new traffic statistics on a tunnel interface.
If you do not specify any parameter, this command clears the statistics for all interfaces.
If you specify only the tunnel keyword, this command clears the statistics for all tunnel interfaces.
If you specify both the tunnel keyword and the number argument, this command clears the statistics for
the specified tunnel interface.
Examples
# Clear the statistics for the interface Tunnel 1.
<Sysname> reset counters interface tunnel 3
Related commands
display interface tunnel

service

Use service to specify the IRF member device for forwarding the traffic on the current tunnel interface.
Use undo service to restore the default.
Syntax
service slot slot-number
undo service slot
Default
No IRF member device is specified for the tunnel interface.
235