Import Route-Policy - HP FlexFabric 12500 Command Reference Manual

Examples
# Configure the type codes of domain ID, router ID, and route type as 0x8005, 0x8001, and 0x8000,
respectively, for OSPF process 100.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] ext-community-type domain-id 8005
[Sysname-ospf-100] ext-community-type router-id 8001
[Sysname-ospf-100] ext-community-type route-type 8000

import route-policy

Use import route-policy to apply an import routing policy for a VPN instance.
Use undo import route-policy to remove the application.
Syntax
import route-policy route-policy
undo import route-policy
Default
All routes matching the import target attribute are accepted.
Views
VPN instance view, IPv4 VPN view, IPv6 VPN view
Predefined user roles
network-admin
mdc-admin
Parameters
route-policy: Specifies a routing policy by its name, a case-sensitive string of 1 to 63 characters.
Usage guidelines
You can specify an import routing policy to filter received routes or modify their route attributes for the
VPN instance.
An import routing policy specified in VPN instance view applies to both IPv4 VPN and IPv6 VPN.
An import routing policy specified in IPv4 VPN view or IPv6 VPN view applies to only the IPv4 VPN or
IPv6 VPN.
IPv4/IPv6 VPN prefers the import routing policy specified in IPv4/IPv6 VPN view over the one specified
in VPN instance view.
Examples
# Apply import routing policy poly-1 for VPN instance vpn1.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] import route-policy poly-1
# Apply import routing policy poly-2 for IPv4 VPN vpn2.
<Sysname> system-view
[Sysname] ip vpn-instance vpn2
81