Interrupt A Job - Oce PlotWave 750 Operation Manual

Interrupt a job

Introduction
Press the Job interrupt key on the scanner operator panel to give extra priority to a copy job.
When you press the Job interrupt key, your copy job will be placed at the top of the printing
queue. When you select Job interrupt, a message appears on the scanner panel display.
The print process will be interrupted after the current page is printed. The transport of originals
on the scanner will not be interrupted.
Procedure
1.
Press the Job interrupt key on the scanner operator panel. The printer interrupts the active job
and stops after the current page is printed.
The Jobs - Queue displays the interrupt job in the print queue at the active job position.
2.
Make copies
3. Press the Job interrupt key again to do another interrupt job.
Press the Exit interrupt button at the Jobs - Queue to continue with the interrupted job and collect
the output at a later time. Collect the output and press the Exit interrupt button at the Jobs -
Queue to continue with the interrupted job.
Chapter 6 - Use the Océ TDS600 scanner for copy and scan-to-file jobs
Interrupt a job
243