Removing the power supply air duct
Your server is equipped with a power supply fan module and a power supply air duct to
direct the airflow and ensure proper cooling.
Caution
To remove the power supply air duct:
1
Follow the instructions in
sure that you turn off the server, then unplug the power cord(s) and all other cables
connected to the server.
2
Follow the instructions in
3
Move cables out of the way.
4
Unscrew the phillips screw holding the power supply air duct in place.
5
Pull up on the air duct to remove it from the server chassis.
To ensure continued, reliable operation, always operate your server
with the appropriate air ducts and air dams in place. Failure to do
this could result in equipment damage.
"Preventing static electricity discharge" on page
"Opening the server case" on page
www.gateway.com
41. Make
42.
49