Table of Contents
Advertisement
Menu
Options
Control the
Boot flags (select from available boot
server
flags)
Set the flag — one time reboot
■
Reboot the system
■
Power control
Power on
■
Power off
■
Reset
IPMI control
Power on
■
Power off
■
IPMI command screen
Issue an IPMI command (text or hex)
■
Set up the server
Language selection (display loaded
language files)
Status setup
Interval timing (set time to retrieve
■
status)
Subsystem mask (mask off
■
subsystems)
Password setup
Password exists/does not exist
■
Create/change password
■
Remote access rights
View (grant or deny)
■
Write (grant or deny)
■
Buttons (grant or deny)
■
www.gateway.com
Description
Configure boot order
Power control
Control the power state by
creating button pushes — as
if performed on the front
panel.
Power control
IPMI control
Send the chipset a power
control command. The same
functionality as if done over
LAN or by GSM.
Issue an IPMI command
Select the LCP display
language
Set sensor refresh interval
Password setup
Remote access control
33
Advertisement
Table of Contents
Troubleshooting
