Replacing The Air Duct - Gateway 995 User Manual

Replacing the air duct

To remove the processor air duct:
1
Follow the instructions in
page 36. Make sure that you turn off the server, then unplug the power
cords and all other cables connected to the server.
2
Remove the top rear panel. For instructions, see
panel" on page
3
Remove the inside panel. For instructions, see
on page 45.
4
Remove the screw that secures the AC power plug module to the back of
the server.
"Preventing static electricity discharge" on
41.
Screw
www.gateway.com
Replacing the air duct
"Removing the top rear
"Removing the inside panel"
91