Gateway 9415 User Manual page 167

BIOS menu
Exit
* See the following Caution before changing the
Caution
The following 2nd level submenus are accessed from the submenu indicated in the first
column.
BIOS submenu
IDE
Configuration
162
BIOS submenu
Before changing modes, back up array data and delete existing
arrays, if any. Otherwise, loss of data may occur.
After operating system installation with a selected SCSI RAID mode,
only change this mode selection if you are prepared to rebuild the
RAID array. Changing the mode could damage the current operating
system installation on the RAID volume.
BIOS 2nd level Setting
submenu
Mixed P-ATA /
S-ATA
First ATA Channel
Second ATA Channel
www.gateway.com
Setting
Platform Event Filtering
Save Changes and Exit
F10
( )
Discard Changes and Exit
ESC
( key)
F7
Discard Changes ( )
F9
Load Setup Defaults (
Load Custom Defaults
Save Custom Defaults
Onboard
Value
Enabled
Disabled
)
SCSI.
Value
P-ATA M-S
S-ATA M-S
S-ATA M-S
None