Resetting Bios Passwords - Gateway 9415 User Manual

3
Remove the jumper across pins C1-C2, then place the jumper across pins C2-C3.
4
Follow the instructions in
5
Reconnect the power cords and turn on the server. The BIOS password(s) is cleared.
6
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
7
Follow the instructions in
8
Place the jumper back onto pins C1-C2.
9
Follow the instructions in

Resetting BIOS passwords

To reset BIOS passwords, you must either reset and clear all BIOS settings, or use the Clear
Password jumper. To reset all BIOS settings, follow the instructions in
on page 113.
114
"Closing the server case" on page
"Opening the server case" on page
"Closing the server case" on page
www.gateway.com
44.
42.
44.
"Resetting the BIOS"