Mounting Your Server Into A Cabinet - Gateway 9415 User Manual

Mounting your server into a cabinet

The cabinet mounting hardware included with your server should be used with standard
4-post cabinets that have front and back vertical posts. If your cabinet is a different type,
obtain mounting hardware from the cabinet manufacturer.
Caution
Caution
Rackmount kit contents:
■
Server rails (2)
■ Cabinet rails (2)
■ L brackets (2, not used for this type of installation)
■ Fastener pack (1)
Small screws (4, #6-32 × 3/16-inch)
■
Medium screws (8, #10-32 × ½-inch)
■
Large screws (2, #10-32 × 7/8-inch)
■
Disk guides (2)
■
Handle spacers (2)
■
Nut bars (4)
■
12
Before attaching cabinet accessories, make sure that the server is
turned off and all power cords are unplugged.
The cabinet must provide sufficient airflow to the front of the server
to maintain correct cooling.
www.gateway.com