Gateway 9415 User Manual page 70

4
Use the arrow keys to select the first disk for the IS volume, use the arrow keys to
move to the
Array Disk
as the value for this column.
If partitions are defined on the selected disk, a message appears warning you that data
on the disk will be lost when the striped volume is created. You can then deselect
that disk or erase the disk and continue.
5
Repeat the previous step to select as many as two more disks for the striped volume.
If partitions are defined on the selected disks, a message appears warning you that
data on the disk will be lost when the striped volume is created. You can then deselect
that disk or erase the disk and continue.
6
When you have selected all disks for the IS volume, press E
then exit this menu. (If you do not want to create the volume, select
then exit this menu.)
The IS volume exists as soon as you save the changes. The RAID Properties screen now
displays the IS volume properties and status.
column for this disk, then use the + and - keys to select
www.gateway.com
and select
Save changes
SC
Discard changes
Yes
,
,
65