12
Insert the new system board into the case, then slide the board toward the back of
the case so the board is held under the system board guides.
13
Replace the seven system board screws you removed in
14
Follow the instructions in
15
Follow the instructions in
16
Follow the instructions in
17
Reinstall the PCI riser assembly by following the instructions in
installing the PCI riser assembly" on page
18
Follow the instructions in
19
Turn on your server, then press F2 when the Gateway logo screen appears during
startup. The BIOS Setup utility opens.
"Installing memory" on page
"Installing a processor" on page
"Replacing fans and fan modules" on page
69.
"Closing the server case" on page
www.gateway.com
Step
9.
66.
82.
76.
"Removing and
44.
105